FullSizeRender-12

Drum Pumps

Showing 21–30 of 30 results

  • FullSizeRender-12

    MR60CDP

    Dose-approx. 10oz.;
    Closure-2″ drum opening;
    Lever-action delivers about 10oz. per stroke with the capability of up to 6 gallons/minute;
    Handles viscous liquids up to 2200cps.;
    With extension tubes, will pump any 15, 30 or 55 gallon drum;
    Cylinder head allows a 360º spigot orientation.


  • p100

    P100


  • IMG_0319

    P100TSR

    Delivers up to 8 ounces per stroke
    316 stainless steel construction
    Teflon® piston and packing

    Handles most liquids*, including methylene chloride, trichlorethane, Freon TE. Drum pumps include plastic 2″ NPS adapter.
    Optional Adjustable Metering Collar MC842, attaches to pump shaft to permit repeatable strokes from 2 to 8 ounces.

    *NOT RECOMMENDED FOR: Ammonium Chloride, Aqua Regia, Bromine Water, Calcium Chloride, Chloracetic Acid, Chlorine Water, Ferric Chloride, Ferrous Chloride, Freon 12, Hydrobromic Acid, Hydrochloric Acid, Hydrofluoric Acid, Sodium Hydroxide, Stannic Chloride, and Sulfuric Acid.


  • P300

    P300


  • p3006

    P3006

    High output in a small package, this lever action drum pump pumps up to 18 ounces per stroke. This die cast steel constructed drum pump fits 2 inch NPS bungs on 15, 30 and 55 gallon drums. Pump handles paraffin, motor and gear oils, cutting oils and many other heavier non-corrosive liquids up to 5,000 cps (centipoise). Includes telescoping intake tube 33 3/4 inches long, curved delivery spout, and special high-angle delivery spout for filling bottles.


  • IMG_0320

    P55TS

    These economical pumps are loaded with features. Supplied with 2″ NPS Bung adapter, fits 15-55 gallon drums. Built-in bonding and grounding wires are equipped with heavy-duty alligator clips. Delivers 8 ounces per stroke.
    Carbon Steel Pump has highly polished carbon steel body with PTFE piston, packing and gasket. Plated steel suction tube with internal flame arrestor.
    Stainless Steel Pump uses 316 stainless steel for all metal parts. PTFE piston, packing and gasket.
    Optional Adjustable Metering Collar slips over handle to permit repeatable strokes from 2 ounces to 8 ounces.
    Shown P55TST

    FM-Approved Drum Pump


  • IMG_6432

    P950V

    This tough, innovative lever-action piston pump handles oils, detergents, and other fluids compatible with polypropylene. It has a filtered nozzle and a 36 inch long telescoping suction tube adjusts for 15 – 55 gallon drums.

    High output, low profile

    • Delivers 8 ounces per stroke
    • No-drip spout eliminates mess and waste

    Fits 2 inch buttress opening or 2 inch NPS with buttress adapter removed.

    Always check chemical compatibility of your product against the pump materials.


  • psp1hd

    PSP1HD

    Heavy duty drum pump;
    2″ NPS


  • IMG_0317

    R-490ST


  • IMG_6832

    THP-ST

    The stainless steel drum pump with T-handle delivers 22 ounces per stroke, up to 1,000 cPs (centipose). This economical wide-spectrum hand pump transfers acids, alkalis, non-flammable solvents, detergents, oils, almost anything compatible with stainless steel and PTFE.

    Includes plastic 2 inch NPT bung adapter and PTFE seal, piston and packing.

    The pump tube outer diameter is 1 1/2 inch, the suction tube is 39 inches long. The overall height of the T-handle pump is 41 inches.

    Note: Always check compatibility

    This stainless steel and PTFE pump is ideal for mild corrosives or aggressive chemicals.